Strand-Mounted HFC-Powered PoE Gateway

Powering flexibility matters in 802.11 mesh deployments. Lindsay LBPOE can power any AP, IP Camera etc. from the HFC strand delivery POE at 24 VDC or 48 VDC. Designed to maintain reliability with HFC uninterrupted powering while offering a cost advantage over conventional powering schemes.

The 48 Volt version of the LBPOE-48 will safely power any 802.3af or 802.3at compliant device. The LBPOE-48 can provide up to 20 Watts of power. The LBPOE-48 passively combines the 48V onto the CAT5 but does not perform the IEEE handshake.


  • Die-cast aluminum housing (clamshell design)
  • Mounting configurations: wall, pole, vault, mast, or strand
  • Dual gaskets provide 15-PSI weather-proof seal
  • Temperature cycled, from -40ºC to +60ºC (-40ºF to +140ºF)
  • Designed to protect against surges
  • Cable plant-powered (40-90 voltage AC)
  • 6Kv Surge protection
  • HFC access at any directional coupler or power-passing tap
  • Weather-tight RJ-45 Ethernet connector
  • Coax power interface protects RF performance of HFC plant
  • Passive PoE (12, 24 or 48 VDC or custom) for powering IP devices
  • Monitor and configure via SNMP agent, SSH or Web browser
  • Add Wi-Fi, camera or other service-enabling device

Technical Specifications

This website uses cookies to ensure you get the best experience on our website. By continuing to browse on this website, you accept the use of cookies for the above purposes.