Strand-Mounted DOCSIS® PoE Gateway (LBDG-DV)

Flexibility matters in 802.11 deployments. Enable your preferred access point (AP) or IP camera with these affordable, Lindsay tough DOCSIS®-based infrastructures now utilizing selectable 0, 12 or 48 VDC passive power over Ethernet (PoE).

Lindsay Broadband’s LBDG-DV series DOCSIS 3.0/3.1 gateways allow the use of any AP, IP camera, etc., on the HFC strand. You can use a Lindsay Broadband recommended device, or any AP (or IP device) that is either 802.3af compliant or accepts passive PoE. Designed to maintain reliability but minimize costs, the hardened LBDG uses a standards-based DOCSIS cable modem that is completely under the control of the cable operator. It can be used in conjunction with SNMP monitoring systems to evaluate cable plant line conditions.

Features

  • Diecast aluminum housing (clamshell)
  • Mounting Configurations: Wall, pole, vault, mast or strand
  • 15 PSI weatherproof seal
  • Temperature-Cycled: -40°C to +60°C (-40°F to +140°F)
  • DOCSIS 3.0/3.1 compliant
  • Cable plant-powered (40-90 VAC)
  • 6 kV surge protection
  • HFC access at any directional coupler or power passing tap
  • Weather-tight RJ45 Ethernet connector
  • Coax power interface protects RF performance of HFC plant
  • Passive PoE 0, 12 or 48 VDC selectable, 802.3af compatible
  • Monitor & configure via SNMP agent, SSH or web browser
  • Add Wi-Fi®, camera or other service-enabling device

This website uses cookies to ensure you get the best experience on our website. By continuing to browse on this website, you accept the use of cookies for the above purposes.